Summers Disk-Chisel Manual de usuario descargar pdf (Pagina 80)

4-2

SECTION 4 – MAINTENANCE

DAILY MAINTENANCE

1. Grease lift arms, walking tandem assemblies and hitch pivot.

2. Check all hydraulic components for leaks.

3. Check tightness of all wheel bolts.

PERIODIC MAINTENANCE

1. Repack wheel bearings and check tightness (See Page 6-21).

2. Check tire air pressure (See speciﬁ cation page 5-2).

3. Check tightness of trip assembly hardware as explained under “Maintenance for after

the ﬁ rst day and week of operation” (Page 4-1).

4. Check tightness of all hardware. Pay special attention to the hitch bolts and all pivot

retaining bolts.

5. Check coulter-chisel for damaged or worn parts. Replace as needed.

STORAGE

1. Clean and remove all excessive dirt and grease from coulter-chisel.

2. Grease all zerks.

3. To prevent rusting, repaint any areas that have been worn, chipped or scratched.

4. Retract cylinders when possible. Apply grease* to any exposed part of cylinder shafts.

*NOTE: Before returning machine into service, all grease must be removed from cylinder

shafts to prevent damage to seals.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 118 119

Sin comentarios

Summers Disk-Chisel Manual de usuario Pagina 80